Hoover Fence - Vinyl Fence, Aluminum Fence, Ornamental Gates And Gate Operators
hooverfence.com || hooverfence.net
Having
trouble getting a 2 or 3 button transmitter to work with your GTO
gate operator?
Multi-channel (multi-button) transmitters
have only 8 dip-switches for programming instead of 9 as the
single button models do. This is because the 9th
segment of the transmitter's code is determined by the choice of
one of the multiple buttons on the transmitter.
On all GTO and Heddolf-GTO compatible
multi-channel transmitters, use of the left button equals a 9th
dip-switch setting of "+", use of the middle (or
right--on a 2-button transmitter) button equals a 9th
dip-switch setting of "0", and use of the right button
equals a 9th dip-switch setting of "-". With
multi-channel mini-transmitters, this is true when the
transmitter is held with the keychain facing you.
Therefore, when you teach your GTO gate
operator's control board a transmitter code with a single button
transmitter and intend also to use a two-button transmitter with
the operator, the 9th segment of the code must be
either a "+" or a "0", depending upon which
button you wish to use for that operator.
Note that the two
transmitter settings illustrated below are identical.
1-BUTTON
3-BUTTON
To use both a
one-button and a multi-button transmitter with your GTO gate operator:
Step 1:
Teach your GTO gate operator your personal transmitter code.
- On your one-button transmitter,
set the dip-switches to your new personal secret code, setting
dip-switch no. 9 to "+".
- Turn the power switch on your
GTO gate operator off.
- Holding down the S-5
programming button on your GTO control board, turn the
power back on.
- Release the S-5 programming
button.
- Press and hold your
transmitter button until the red light on your GTO
control board flashes bright, then returns to dim.
- You have now taught your new
transmitter setting to your GTO gate operator, and the
operator is in its normal operating mode.
Now your GTO
gate operator will work with any GTO-compatible transmitter.
Step 2:
Set your 2 or 3 button transmitter to work with your GTO gate
operator.
- Set the 8 dip-switches on
your 2 or 3 button transmitter to match the first 8
dip-switches of your one button transmitter.
- Press the left button on your
2 or 3 button transmitter. If you have a 2 or 3
button mini-transmitter, hold it with the keychain
facing you.
If you have
followed the above instructions precisely, your gate will now
open.
To use only
multi-button transmitters with your GTO gate operator:
- Set the 8 dip-switches on
your multi-button transmitter however you like.
- Turn the power switch on your
GTO gate operator off.
- Holding down the S-5
programming button on your GTO control board, turn the
power back on.
- Release the S-5 programming
button.
- Press and hold the left
button on your transmitter until the red light on your
GTO control board flashes bright, then returns to dim. This
is now the button that will open your gate.
- You have now taught your new
transmitter setting to your GTO gate operator, and the
operator is in its normal operating mode.
Now you can
use any 2 or 3 button transmitter with your GTO gate
operator. Simply repeat the above steps with your additional
transmitters, setting the dip-switches identically to the
ones in your first transmitter.
hooverfence.com || hooverfence.net
C:\fencecom\public_html\hooverfence\server-side\fencecom-footer.htm
E-mail | Contact | Vinyl | Chain Link | Ornamental | Operators | Search | Return Policy | Shipping Policy
| Privacy Statement |
Copyright 1995-2003 Hoover Enterprises,
Inc. - All Rights Reserved. www.HooverFence.com.
Striving to be the largest online fence and fencing materials retailer and distributor or chain-link fencing,
ornamental
cast iron and aluminum fencing, gate operators
and access control, garage door openers and replacement parts, and Vinyl
(PVC) fencing for swimming pool, home and garden security, dog kennels,
horses,
farms, and ranches, We carry: Bufftech,
Jerith,
Ultra
Aluminum, PrivacyLink, Master Halco®,
UniLatch, Hound Surround®,
MagnaLatch®,
Delgard,
Door
King, GTO/Pro, OSCO,
Aiphone,
American
Access Systems, Sentex, Multi-Code, Stanley, LiftMaster, Linear, Genie and many others. |
|
|